supply professional and honest service.
Today, I’m sharing an easy and inexpensive way to make your own DIY Soundproof panels for your music studio, home theater or home gym.
Do you have a noisy room that you wish were quieter?
That’s what happened to our home gym.
We have a history with making soundproofing panels.
Trent and I have been professional musicians for many, many years now and we’ve had a recording studio in each home we’ve ever lived in.
And since my husband is a drummer, I quickly learned how sound travels – especially when we were sharing walls in a duplex!
So we needed to find the easiest ways to build sound absorbing panels to help keep our neighbors happy!
Many moons ago, when we lived in Vegas, we built these sound panels that have lasted years in all the homes we’ve lived in.
This is the 4th home we’ve used these sound panels and I’m surprised at how well they have stayed together all these years!
When we were making over our Small Home Gym, we instantly noticed how noisy the room was with all the hard surfaces.
So we added these sound absorption panels to help with noise reduction.
I thought this may be helpful if you have a movie room, a home studio, or even a loud home gym like we did!
(Some affiliate links are provided below. Full disclosure here.)
These are the supplies you’ll need for this project.
Since I can’t travel back in time and take photos of the frame build, I’ll be as detailed as possible in how we made them.
Basically, you are building long rectangular wood frame. We used 1 inch furring strips. If you want a thicker panel, you can change the size of the wood.
But we have found that the furring strips keeps the panels light and still are an effective way to absorb ambient noise in your room.
Cut the length of the pieces of wood to your desired size. Ours are approx 6 ft tall x 2 ft wide. We have a few that are a different size as well.
The easiest strategy is to build butt joints. You could use wood screws or nail them together after adding a dab of wood glue to the end where the joints meet up.
Since these will hang from the wall, we added L brackets to the inside of the joint.
This little trick has been secret to our panels not falling apart all these years later.
The first thing you want to do after building your frame is cover the wood with batting.
For the inside of our diy soundproof panels, we used foam bedding toppers to fill the in space.
We secured ours to the frame using these plastic straps, but spray adhesive would also work by attaching it to the batting.
The next step is to cover it with your fabric.
You could purchase sound absorption material, but we just used different fabrics each time.
The first time we covered it with an upholstery type of fabric and the second layer was black cotton. The best fabric is one that works well with your home decor!
Like I said before, we have used these in multiple houses and the fabric had taken quite a beating.
So I wanted to recover them one more time using a charcoal colored felt that I found at Walmart.
So you want to lay your panel down on a flat surface.
You want to trim your fabric so there’s enough of an edge to fully wrap around the wood frame you built.
Then you lay your panel on top of the fabric with the back of the panel facing the ceiling.
Today, I’m sharing an easy and inexpensive way to make your own DIY Soundproof panels for your music studio, home theater or home gym.
Hint: Test how your fabric pulls. This may allow you to adjust your cuts. Since we used felt, it had a lot of pull and we could cut the fabric about an inch around each side.
Then you simply staple the fabric to the frame.
We started with short side of the frame and then moved to the long side.
Since we didn’t remove the previous fabric from the frames, we pulled out our pneumatic staple gun and it worked perfectly.
Continue around the back of the frame until all your fabric is stapled.
Flip the panel around to check how the fabric looks on the front of the panel.
Today, I’m sharing an easy and inexpensive way to make your own DIY Soundproof panels for your music studio, home theater or home gym.
You just want to make sure the fabric isn’t puckering or pulling where it shouldn’t.
Now you can hang the panels as is and it has worked for us in the past.
But this time around, we wanted to jazz them up a bit.
So we opted for a cedar frame around the edge.
So we cut the 1×2″ cedar boards the length of the short side first and nailed those to the wood frame.
Next we measured the long side and cut the sides to create the same butt joint as before.
We used a pneumatic finish nailer and it went through the wood and fabric as well as the original frame.
And now we had beautiful panels to add to our home gym!
Adding the external frame definitely helps the panels pop.
And it didn’t add to the weight of the panels making them super easy to hang on the wall.
We used two nails for each panel and hung it on the wall like a picture frame, but you could use picture wire attached to the back of the frame if you’d like.
Since our home gym is in the basement along with our music studio, I opted for a pseudo industrial vibe so that the rooms flow together.
I love the solid color with a few hints of texture that the felt fabric gives.
Here are few more ideas and frequently asked questions for you.
There are other solutions out there that can absorb sound waves. We’ve tried a few, but are still on the fence about some of these suggestions.
I have to say a resounding yes!
Not only is Trent a professional drummer, but our youngest son attends a fine arts school for percussion. Adding to that, our oldest boy plays bass guitar.
So yeah, this momma needs some quiet spaces in her home and these soundproof panels have shown a significant improvement to the noise.
We have hung our acoustic wall panels to our interior walls. But you can also hang them on an interior door – especially if it’s a hollow-core door.
The trick is to measure your surface area and that will help you decide how many panels you could use. We hung 3 panels, approximately 2 ft wide, spaced about a foot apart.
That depends on the size of the room as well as what you are sound proofing.
This may require a bit of homework for your own acoustic panels and the purpose you are using them for.
We installed 3 in our home gym and that was enough to soften the noise a little bit.
For our recording studio, we have many more in the control room. We also built these wood diffuser panels that help with the sound transmission.
The best way to control the background noise in a room, or maybe even loud music from your neighbor is by making these inexpensive panels for yourself. It’s so quick, easy and can be done in a day!
I hope this inspires you to build these for your noisy room.
The good thing is that you can use dozens of different colors and customize these for your own home theater room.
shop our favorite home items
shop now
Don’t miss the next DIY! Receive exclusive content, including behind the scenes photos, our favorite home decor DIYs and more!
Subscribe
In almost every way, the modern drywall-over-studs wall is better than its timber-and-masonry and plaster-and-lath ancestors. It’s fast and easy to build, lightweight and makes the most of inexpensive materials. But when it comes to stopping sound, the modern wall is a flop.
This article will show you how to make these walls (and ceilings) block sound better. Soundproofing walls involves ripping the existing drywall off the walls (and perhaps the ceiling), filling the walls with fiberglass insulation, attaching metal strips called “resilient channel” to the studs, and fastening new drywall to the channel.
This straightforward project to make your room soundproof doesn’t require specialized tools or high-level construction skills. Anyone who has experience hanging and taping drywall, along with a little carpentry and electrical know-how, can soundproof a room.
However, soundproofing is a messy, labor-intensive project. To minimize household havoc, it’s best to focus on one room at a time. The room might be a place that you want to keep sound out of—a home office, for example. Or it may be a room you want to keep sound in—like a home theater. Find out if it is possible to soundproof an entire house. Also, learn if putty pads help with soundproofing.
Editor’s Tip: There’s nothing more disruptive to a night of sleep than excessive sound apart from a cold chilly breeze, these seemingly minor noises can have an outsized impact on your well-being. So, turn to soundproof curtains to block out some of the din.
This project is also one of our home theater design ideas.
If you are looking for more details, kindly visit our website.
For more information, please visit post tension system services.