How to Install Interlocked SUS Flexible Metal Conduit.
If you're planning to install interlocked SUS flexible metal conduit, you've come to the right place. In this article, we'll guide you through the process of installing interlocked SUS flexible metal conduit step-by-step so that you can get the job done right.
Materials Needed:
Before starting your installation, make sure you have the following materials:
- Interlocked SUS flexible metal conduit.
- Liquid tight connector.
- Conduit cutter.
- Central knockout punch.
- Flat and Phillips head screwdrivers.
- Pliers.
- Electrical tape.
- Measuring tape.
Step 1: Measure the Length of the Conduit to Be Installed.
Before starting the installation, measure the length of the conduit to be installed. You can either cut the conduit into pieces or use one long piece of conduit, depending on the length of the installation.
Step 2: Cut the Conduit.
Using a conduit cutter, cut the conduit to the desired length.
Step 3: Create a Central Knockout Hole.
Using a central knockout punch, create a central hole in the metal box for the conduit to pass through. Ensure that the hole is aligned with the conduit, ensuring that the metal box sits perfectly on the conduit.
Step 4: Install the Liquid Tight Connector.
Insert one end of the conduit into the liquid tight connector. Then, screw the liquid tight connector onto the central knockout hole of the metal box. Tighten the screws using a flat head screwdriver.
Step 5: Insert the Other End of the Conduit into the Required Location.
Insert the other end of the conduit into the location where it is required. Ensure that the conduit is not stretched too much to avoid a loose connection.
Step 6: Secure the Conduit with a Liquid Tight Connector at Its Termination Point.
Screw the liquid tight connector onto the termination point of the conduit and ensure that it is tight. Any looseness could result in the conduit getting dislodged, thereby interrupting the electrical supply.
Step 7: Secure the Conduit Using Screws.
Secure the conduit in place using screws and a Phillips head screwdriver. Ensure that the screws hold the conduit properly to avoid it from falling.
Step 8: Cover the Electrical Connections with Electrical Tape.
Cover the electrical connections with electrical tape, ensuring that none of the wire is left exposed. Exposed wires can lead to shocks or short circuits, which may damage the electrical supply.
Conclusion:
Interlocked SUS flexible metal conduit installation can seem intimidating, but it's quite a straightforward process. By following these steps, you should be able to install interlocked SUS flexible metal conduit with ease.
If you're not confident about doing it yourself, contact us or get in touch with a supplier. They can help you install the conduit quicker and more efficiently thereby avoiding mistakes.
If you want to learn more, please visit our website flexible metal conduit manufacturer, LSZH Jacket Flexible Metal Conduit.