Are you planning to use Potassium Humate 98 (K-Humate 98) as a soil conditioner or a fertilizer enhancer? If yes, then one of the critical considerations in using this product is determining the right dosage to achieve optimal results. K-Humate 98 is a highly concentrated form of humic acid extracted from leonardite, and as such, it is more potent and requires careful application. In this blog, we will guide you step-by-step on how to choose Potassium Humate 98 dosage.
Step 1: Determine the Soil Type and pH.
The first step in choosing the appropriate K-Humate 98 dosage is to know your soil type and pH. Soil types include sandy, clay, and loamy, and their character impacts the ability of the soil to hold nutrients and water. For instance, sandy soil doesn't hold water or nutrients well, meaning that more K-Humate 98 is required to enhance its fertility. Meanwhile, clay soil retains water and nutrients, and therefore, less K-Humate 98 can work for such soils.
Soil pH levels also determine the effectiveness of K-Humate 98. The optimum soil pH for most plants is between 6.0 and 7.5, indicating that most nutrients are available in this range. If the pH is too low, below 5.5, it's acidic, indicating that aluminum, manganese, and iron may be present in toxic quantities. On the other hand, a high pH above 7.5 makes essential trace elements less available.
Step 2: Determine the Type and Maturity of the Plant.
K-Humate 98 is formulated for different plant types and growth stages. Therefore, determining the type and maturity of the plant is critical in choosing the right dosage. Different plants have different nutrient requirements, and their growth rates vary hence the K-Humate 98 dosage varies. For example, young plants and seedlings require less fertilizer, and therefore, you should use a lower K-Humate 98 dosage.
Additionally, mature plants require less Nitrogen, Phosphorus, and Potassium (NPK) than young plants, and they require more of the secondary and micronutrients. Therefore, identify the stage of plant growth and whether they are annual or perennial crops.
Step 3: Consider the Desired Results.
The intended results of using K-Humate 98 in soil conditioning also determine the dosage. For instance, if the goal is to enhance the soil structure and water holding capacity, a higher dosage of K-Humate 98 may be required. This is because the humic acid in K-Humate 98 can bind free cations, helping to improve soil's structure, and hence prevent soil erosion.
Alternatively, if your goal is to enhance plant growth, reduce stress, and improve nutrient absorption, then a lower dosage of K-Humate 98 may be required. Essentially, plants require Nitrogen and Phosphorous for growth, and Potassium helps them utilize these two elements, in addition to regulating various plant processes such as photosynthesis and water absorption.
Step 4: Determine the K-Humate 98 Concentration.
The concentration of K-Humate 98 in the product influences the application rate. Typically, the K-Humate 98 strength varies between 10 to 25% humic acid, meaning that the remaining volume is water and other micronutrients such as iron, manganese, zinc, and copper. Therefore, if you choose a K-Humate 98 with a higher concentration, like a 25% strength, use a lower application rate.
Step 5: Determine the Application Method.
K-Humate 98 has different application methods, such as foliar spraying, soil drenching, and injection into the irrigation system. Each application method requires a different dosage. For instance, if you choose a foliar spray, you require a lower dosage than soil drenching or irrigation injection. This is because the foliar spraying method is direct and efficient, with the humic acid nutrients get directly into the plant.
Step 6: Choose the Right Dosage.
The final step is to choose your K-Humate 98 dosage based on your soil type and pH, plant types and maturity, desired results, concentration of K-Humate 98 in the product, and the application method.
In general, the recommended dosage for K-Humate 98 is between 30-40 kg per hectare for the dry powder and between 10-15 kg per hectare for the liquid product. However, you may need to do a soil test to determine the precise dosage required for your specific soil or get advice from an expert.
Conclusion.
In conclusion, Potassium Humate 98 is an excellent soil conditioner and fertilizer enhancer when applied appropriately by observing the correct dosage. The K-Humate 98 dosage will depend on various factors such as soil type and pH, plant types and maturity, the desired results, and the concentration of K-Humate 98 in the product. Thus, following the steps outlined above will help you choose the right dosage so that you can achieve optimal results from using K-Humate 98.
If you want to learn more, please visit our website potassium humate 98 dosage, ammonia sulphate for lawns, map 12-61.